REBAR TYING TOMOROBO©
Details / Specifications

Functions

Functions
Functions

Adapts Automatically
to Changes in Rebar Pitch

TOMOROBO© senses intersections as it goes along, so it automatically adapts to changes in pitch.

It adapts to the rebar pitch of 100-300mm, in 25mm increments. Adaptable rebar diameters are φ10/φ13/φ16.*1 Pitch allowance is ±20mm. Furthermore, it senses intersections even if there are variances in height or angles and ties them securely.
*1 It may not be able to tie three φ16 bars together.

Adaptable Pitch

Adaptable Pitch
Adaptable Pitch

The adjustable working unit adapts to the rebar pitch of 100-300mm, in 25mm increments. Three sensors move up and down independently to flexibly adapt to unevenness at the site.

Adaptable Pitch

Rebar Surface Inclination

Rebar Surface Inclination Sideways Rebar Surface Inclination Sideways

※JASS5 compliant spacer pitch is 1m.

Rebar Surface Inclination Running Direction Rebar Surface Inclination Running Direction

Cautions for Spacer Placement

Cautions for Spacer Placement

●Do not place on intersections of rebars.
●Spacer pitch should be 1m or less.
●Spacer height should be 60 mm or more.

※May not tie properly if clearance is under 60mm with TOMOROBO© placed on rebars.
e.g. Rebars are bent. Ground is elevated. etc.

Vertical and Horizontal
Rebar Clearance

 Vertical and Horizontal Rebar Clearance

Rebar Tying Capacity

REBAR TYING TOMOROBO©
RTM1-X1-A1

Adaptable rebar diameters are φ10/φ13/φ16*1.
*1 It may not tie three φ16 bars together.

2Bars
D10 D13 D16
D10
D13
D16
3Bars
D10 D13 D16
D10・D10
D13・D13
D16・D16
4Bars
D10・D10 D13・D13 D16・D16
D10・D10
D13・D13
D16・D16
LARGE DIAMETER TYING
TOMOROBO©
RTM1-X1-A2

Adaptable rebar diameters are φ16、φ19、φ22、φ25、φ29、φ32.

2Bars
Upper Bars
D16 D19 D22 D25 D29 D32
Under Bars D13
D16
D19
D22
D25
D29
D32
3Bars:2Upper Bars
Upper Bars
D10・D10 D13・D13 D16・D16 D19・D19 D22・D22
Under Bars D10
D13
D16
D19
D22
D25
D29
D32
3Bars:2Under Bars
Upper Bars
D10 D13 D16 D19 D22 D25 D29 D32
Under Bars D10・D10
D13・D13
D16・D16
D19・D19
D22・D22
4Bars
Upper Bars
D10・D10 D13・D13 D16・D16 D19・D19
Under Bars D10・D10
D13・D13
D16・D16
D19・D19

Rebar Tying Capacity

REBAR TYING TOMOROBO© RTM1-X1-A1

Adaptable rebar diameters are φ10/φ13/φ16*1. *1 It may not tie three φ16 bars together.

2Bars
D10 D13 D16
D10
D13
D16
3Bars
D10 D13 D16
D10・D10
D13・D13
D16・D16
4Bars
D10・D10 D13・D13 D16・D16
D10・D10
D13・D13
D16・D16
LARGE DIAMETER TYING TOMOROBO© RTM1-X1-A2

Adaptable rebar diameters are φ16、φ19、φ22、φ25、φ29、φ32.

2Bars
Upper Bars
D16 D19 D22 D25 D29 D32
Under Bars D13
D16
D19
D22
D25
D29
D32
3Bars:2Upper Bars
Upper Bars
D10・D10 D13・D13 D16・D16 D19・D19 D22・D22
Under Bars D10
D13
D16
D19
D22
D25
D29
D32
3Bars:2Under Bars
Upper Bars
D10 D13 D16 D19 D22 D25 D29 D32
Under Bars D10・D10
D13・D13
D16・D16
D19・D19
D22・D22
4Bars
Upper Bars
D10・D10 D13・D13 D16・D16 D19・D19
Under Bars D10・D10
D13・D13
D16・D16
D19・D19

Basic Specifications

REBAR TYING TOMOROBO© RTM1-X1-A1/ LARGE DIAMETER TYING TOMOROBO© RTM1-X1-A2 (in common)

REBAR TYING TOMOROBO©
RTM1-X1-A1/
LARGE DIAMETER TYING TOMOROBO©
RTM1-X1-A2 (in common)

Basic Specifications

Operating
Climate
Temperature:0℃-40℃  Humidity: 0%- 80%  ※Cannot be used in rain or snow
Tying
Intervals
2.7 Seconds per Location (200mm pitch, 2 tying tools)
Maximum
Operation
Time
12 Hours (200mm pitch, two tying tools used, battery fully charged, operating temperature 25℃)
Tying
Patterns
All intersections, Every other intersection, Every three intersections
External
Dimensions
Length:69cm Width: 63-93cm (Variable) Height: 60cm (Not including detachable sensors)
Weight 38.5kg (Not including tying tools)
Rebar
Compatibility
Rebar Diameter:
RTM1-X1-A1: φ10/φ13/φ16(*1)
RTM1-X1-A2: φ16/φ19/φ22/φ25/φ29/φ32
Rebar Pitch:
100-300mm in 25mm increments
Pitch Allowance:
±20mm

※Specifications are subject to change without notice.
*1: It may not be able to tie three φ16 bars.

Safety PrecautionsSafety Precautions

  • ●In order for TOMOROBO© to tie at intersections, do not place spacers in the intersections.
  • ●When carrying, always use the handle on top with 2 persons. *The handles on the sides are used to change the width of TOMOROBO©.
  • ●When changing the width of TOMOROBO©, please do so before placing on rebars.
  • ●Be sure to cap the charging port before starting tying operations. *There is a risk of short circuits if it gets wet.

About a Trademark

In Japan, TOMOROBO© is a registered trademark of KEN ROBOTECH CORPORATION. 
*Patent applied for

What KEN ROBOTECH is Aiming for
The Stories Behind TOMOROBO© Development

Read More

Robots Working Alongside People
Labor-saving Solution